10
You (as the authorised signatory) will need to contact the EFTPOS Helpdesk to change
your passwords on 1300 650 977.
Refund, Settlement, Void and Terminal passwords will have a default setting (unless
nominated by you at the time of application) when you receive your terminal(s).
3.5 User Management Code
(See User Guide section 6.0).
The USER MANAGEMENT code is only used when the SHIFT feature is enabled on
the terminal. Each “user” must be assigned a “User ID”. The user cannot log in or
out of a shift without using the USER MANAGEMENT code. Up to 10 User ID’s can be
programmed into the terminal.
The User Management code is selected by the user at the time the “User ID” is being
established on the terminal (generally at the start of the shift). The code is a four digit
number nominated by the user.
DIAL-UP EFTPOS MERCHANT OPERATING GUIDE PASSWORDS AND CODES
To Next Page
Loading...