41DIAL-UP EFTPOS MERCHANT OPERATING GUIDE HOW TO OPERATE USER MANAGEMENT (SHIFT) FUNCTION
6.3 How to Start Shift
The terminal can manage up to 10 different users, the first (User 01) being referred to as
the shift leader. The shift leader must start a shift before the other users. For each user,
the terminal stores the number of transactions, the total transaction amount and the tip
amount. When the shift/user reports are printed, the terminal indicates the date and
time the totals were started and ended.
TERMINAL DISPLAY PROCEDURE
22/05/2009 12.54
ENTER AMOUNT
Press the Function (FUNC) button.
FUNCTION? Key in 61 and press ENTER.
ENTER USER ID Enter the User ID (01-10) and press ENTER.
PASSWORD: The user is required to enter their 4 digit code.
USER MANAGEMENT
SHIFT STARTED
The terminal confirms that User ID has been
recorded.
6.4 How to End Shift
This function will end the shift and print an ‘End of Shift’ report.
TERMINAL DISPLAY PROCEDURE
22/05/2009 13.16
ENTER AMOUNT
Press the Function (FUNC) button.
FUNCTION? Key in 62 and press ENTER.
PASSWORD:
Key in the terminal or shift leader password and
press ENTER.
END SHIFT
CORRECT? YES/NO
Press ENTER to end the Shift.
END SHIFT
PRINTING
The terminal will now print the end Shift Report.
To Next Page
Loading...