DIAL-UP EFTPOS MERCHANT OPERATING GUIDE TRANSACTION PROCEDURES16
5.0 Transaction Procedures
5.1 How to Process a Sale
TERMINAL DISPLAY PROCEDURE
22/05/2009 12.28
ENTER AMOUNT
Key in the purchase amount and press ENTER.
SALE $4.00
ADD CASH AMT
& / OR ENTER
If ‘Purchase with Cash’ transactions are enabled
on the terminal, you can enter a cash-out
amount. The cash-out amount may be left at
$0.00.
SALE $4.00
INSERT / SWIPE CRD
If presented with a chip card, insert the
customer’s card into the chip card reader. Refer
to Inserting a Chip Card in section 4.1
OR:
If presented with a magnetic stripe card, swipe the
customer’s card through the card reader. Refer to
Swiping a Magnetic Stripe Card in section 4.2.
SALE $4.00
SELECT ACCOUNT
CHQ SAV CR
Press the soft key beneath the account type
needed.
SALE $4.00
PIN & / OR ENTER
Where prompted, have the cardholder key in
their PIN and press ENTER, or just press ENTER.
1
CREDIT SALE
PROCESSING
The terminal is connecting to the bank and
processing the sale.
2
VERIFY SIGNATURE
CORRECT? YES/NO
**REMOVE CARD**
If the card was inserted, remove the card from
the reader.
If signature is required: Have the customer sign the
receipt. If the signature matches the signature on
the card, press ENTER. Otherwise press CANCEL.
CUSTOMER COPY
PRESS ENTER
Press ENTER to print customer receipt.
To Next Page
Loading...