DIAL-UP EFTPOS MERCHANT OPERATING GUIDE TRANSACTION PROCEDURES 37
TERMINAL DISPLAY PROCEDURE
C/O $40.00
INSERT/SWIPE CARD
If you keyed in the Approval Code this screen
will appear.
Insert the customer’s chip card into the chip
card reader.
Or:
Swipe the customer’s card through the card
reader.
Or:
Key in the card number, expiry date, CCV (if
available) and the terminal password and press
ENTER for manual entry.
C/O $40.00
ADD TIP AMT
& / OR ENTER
If your terminal is enabled for tips, this screen
may appear. Key in the tip amount and press
ENTER, or just press ENTER.
C/O $40.00
ENTER TO CONFIRM
Press ENTER to confirm Checkout amount.
VERIFY SIGNATURE
CORRECT? YES/NO
**REMOVE CARD**
If the card was inserted, remove the card from
the reader.
If signature is required: Have the customer
sign the receipt. If the signature matches the
signature on the card, press ENTER. Otherwise
press CANCEL.
CUSTOMER COPY
PRESS ENTER
Press ENTER to print customer receipt.
Before completing the sale, check that the initial transaction was approved.
Hand the customer their copy of the transaction record and their card. If the
transaction is declined, the terminal will display an error message giving the reason.
An explanation of the error code is available in section 11.2, Response Codes.
To Next Page
Loading...