Contents
1 Features...........................................................................2
2 Ordering information ..............................................................3
2.1 Product marking ...............................................................3
2.2 Codification ...................................................................3
3 Development environment .........................................................4
3.1 System requirements ...........................................................4
3.2 Development toolchains .........................................................4
3.3 Demonstration software .........................................................4
4 Conventions.......................................................................5
5 Delivery recommendations ........................................................6
6 Getting started ....................................................................7
7 Technology partners...............................................................8
8 Hardware layout and configuration.................................................9
8.1 Embedded STLINK-V3E .......................................................12
8.1.1 Description ............................................................12
8.1.2 Drivers ...............................................................12
8.1.3 STLINK-V3E firmware upgrade.............................................13
8.1.4 Using an external debug tool to program and debug the onboard STM32.............13
8.2 Power supply .................................................................14
8.2.1 Supplying the board through STLINK-V3E USB connector 5 V / 500 mA .............14
8.2.2 Supplying the STM32H7B3I-DK using the external power supply input from VIN (7 to 12 V,
800mA max) ...........................................................15
8.2.3 Supplying the STM32H7B3I-DK using USB charger (5 V).........................15
8.2.4 Supplying the STM32H7B3I-DK using USB OTG HS connector (5 V / 500 mA) ........15
8.2.5 MCU power supply – SMPS/LDO configuration ................................15
8.3 Measurement of MCU current consumption .......................................19
8.4 Clock source .................................................................19
8.5 Reset sources ................................................................20
8.6 Board functions ...............................................................20
8.6.1 TFT color LCD 480x272 pixels .............................................20
UM2569
Contents
UM2569 - Rev 1
page 49/54
To Next Page
Loading...
Need help?
General
