ST STM32U5 - Features; STM32 U5 Microcontroller; Board Connectors; On-board STLINK-V3 E Debugger

1 Features
• STM32U5 Series microcontroller (Arm
®
Cortex
®
-M33 at 160 MHz) in LQFP144 package
• Internal SMPS to generate V
core
logic supply, identified by '-Q' suffixed boards
(1)
• USB Type-C
®
sink device FS
• 3 user LEDs
• RESET and USER push-buttons
• 32.768 kHz crystal oscillator
• Board connectors:
–
USB Type-C
®
connector
–
ST Zio connector including ARDUINO
®
Uno V3
– ST morpho extension pin headers for full access to all STM32 I/Os
• Flexible power-supply options: ST-LINK, USB V
BUS
, or external sources
• On-board STLINK-V3E debugger/programmer with USB re-enumeration capability: mass storage, Virtual
COM port, and debug port
• Comprehensive free software libraries and examples available with the STM32CubeU5 MCU Package
• Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded
Workbench
®
, MDK-ARM, and STM32CubeIDE
1. SMPS significantly reduces power consumption in Run mode, by generating V
core
logic supply from an internal DC/DC
converter.
Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM2861
Features
UM2861 - Rev 2
page 2/49