Important information
HemoPoint
®
H2 User’s Guide
7
hour), before you connect to the main power supply or switch on
the instrument.
Only use original equipment!
Only attach equipment that is expressly approved for use with the
HemoPoint
®
H2. Stanbio does not guarantee the function of the
instrument when other equipment is used.
Never open the photometer!
There are no parts in the photometer that require customer
maintenance. Repairs can only be carried out by Stanbio
Laboratory personnel. Further notes on maintenance can be
found in Section 6.
Do not force the cuvette holder!
The cuvette holder is very important for the quality of testing.
Therefore mechanical force on the holder should be avoided and
only the designated microcuvettes should be used. For cleaning
purposes the cuvette holder can be removed from the photometer
after a mechanical locking device is released. Notes on this can
be found in Section 6.
To Next Page
Loading...