Stanbio HemoPoint-H2 - Setting up the Photometer

To Next Page

To Previous Page

Set up

HemoPoint

H2 User’s Guide

Additional materials required but not provided

• Latex Gloves

• Sampling devices for capillary blood collection

• Biohazardous waste container

• Alcohol swabs and gauze for cleaning puncture site

• HemoPoint

H2 n•x•t Microcuvettes

• HemoPoint

H2 Hemoglobin Controls (optional)

• HemoPoint

H2 Optics Cleaner

Why Register your HemoPoint

H2?

Returning the completed Warranty Registration Card will activate

your warranty and allow Stanbio to provide you with the latest

product updates and improvements.

Even easier – Go to www.stanbio.com/warranty.php and

H2 online!

What is your voltage?

Check that the AC voltage and frequency printed on the AC

adaptor label match your electrical socket and whether the shape

of the plug is compatible for this connection. If not, do not connect

the photometer to the electrical socket under any circumstances.

Contact Stanbio Laboratory in this case.

3.2 Setting up the photometer

Select a suitable place for setting up the photometer, according to

the following criteria:

 Avoid direct sunlight

 Avoid strong electromagnetic fields

 Avoid direct influence from ionizing radiation

 Avoid rapid temperature fluctuations (keep away from

heaters, open windows, ventilators, fans or air-

conditioning, etc.)

 Avoid wet areas (i.e. wash basins)

WARNING!