Sampling and testing procedure
HemoPoint
®
H2 User’s Guide
23
carefully wiping off with a gauze or lint-free tissue (see
Illustration 14).
Please note, do not remove any blood from the cuvette cavity.
DO NOT try and top-off cuvette if not filled completely. Repeat the
process with a new drop of blood and a new cuvette.
The cuvette sample can now be tested immediately or within 10
minutes. DO NOT read cuvette after 10 minutes. For further
steps, please read Section 4.2 “Performing the test”.
4.2 Performing the test
(“Hgb limit” mode ON with the “Hematocrit” mode ON)
Illustration 16: Opening the cuvette holder.
1. Open the cuvette holder completely.
WARNING!
To Next Page
Loading...