Stanbio HemoPoint-H2 - Settings; Setting the Language; Setting Date Format

To Next Page

To Previous Page

Further functions

HemoPoint

H2 User’s Guide

Please be very careful when setting the contrast. At certain

temperatures you can no longer read anything on the display

under certain conditions with some contrast settings. Should

you accidentally store these settings by pressing the OK button,

the instrument must be reset. You can read about this in Section

7 “Troubleshooting”.

The function of the individual keys can be found in Section 5.3.2

“Setting the date”.

5.3.7 Settings

In this menu some general format settings can be found.

5.3.7.1 Setting the language

The HemoPoint

H2 photometer supports various languages. The

function of setting the language can be found under “Menu”, sub-

menu “Settings”, sub-menu “Language”. This gives you the

ability to set the photometer to the language you wish to use.

The following languages are supported:

 German

 English (default)

 Spanish

The function of the individual keys can be found in Section 5.3.4

“Setting the units”.

5.3.7.2 Setting date format

Under the “Menu”, sub-menu “Settings”, sub-menu “Date

Format” the output format of the date can be set. This affects the

output of data record in the memory (data storage) and the

printout of the results.

The following settings are supported:

 DD.MM.YY (Day.Month.Year)

 MM/DD/YY (Month/Day/Year) (default)

 DD/MM/YY (Day/Month/Year)

 YY-MM-DD (Year-Month-Day)

WARNING!