Stanbio HemoPoint-H2 - Charging and Care of the Battery

To Next Page

To Previous Page

Further functions

HemoPoint

H2 User’s Guide

5.6.1 Connecting a printer

The HemoPoint

H2 photometer supports the connection of a

Seiko Model No. DPU-414 serial printer.

The DPU-414 can be ordered through an authorized Stanbio

Laboratory distributor.

With the use of a printer you can print each patient’s test result

immediately or print patient result(s) from memory (data storage)

later (see Section 5.2.2 “Printing out results”).

Illustration 31: DPU-414 printer.

5.6.1.1 Connecting the printer cable

To connect the printer to the HemoPoint

H2 a special printer

cable is needed which is included with each printer if sold for use

with the HemoPoint

H2 or may be purchased separately from an

authorized Stanbio Laboratory distributor.

Please only use the cable intended for this purpose, otherwise

both the photometer and the printer may be seriously damaged.

WARNING!