Stanley T15h User Manual

T15h Tag Deployment & User Guide
18
The STANLEY T15h Tag Certificate
To allow a MobileView Server
the T15h Tag must be pre-loaded with a Root CA certificate that authenticates
through an Intermediate Certificate using a Chain of Trust (see Error!
Reference source not found.).
The T15h Tag must be pre-loaded with only a Root CA certificate. Any other
certificate that is pre-load
verification.
Certificate Format
T15h Tags can be pre-loaded with a Root CA certificate in X.509v3 PEM format
-----BEGIN
CERTIFICATE----- -----END CERTIFICATE-----
MobileView Server Certificates
The following certificates must be pre-installed on the MobileView Server to
allow the certificate validation to be performed by T15h Tags:
• SSL Certificate issued for this specific server
• All Intermediate Certificates
• Root CA Certificate
If one of the above certificates from the Chain of Trust is not installed on the
MobileView Server, the T15h
verification.
MobileView Server Host Name
The M -
srv-1.corp.aeroscout.com). The domain must correspond to the CN set in
Certificate Definitions
T15h Tag certificate-based authentication of the MobileView Server is based
on the following definitions:
Chain of Trust
A certificate chain is an ordered list of certificates, containing an SSL
Certificate, Intermediate Certificates and a Root CA Certificate, that enable the
receiver to verify that the sender and all CA's are trustworthy.

Stanley T15h Specifications

General

Brand	Stanley
Model	T15h
Category	Measuring Instruments
Language	English