T15h Tag Deployment & User Guide
49
When using the Email Action Type, select the Message Template as
Measurements Message.
Additionally when using INF, you can choose what fields to display in the
Selected Alert Fields.
Humidity Event
This event issues an alert based on humidity readings transmitted by active
tags equipped with a humidity sensor. You can set specific conditions for the
alert or inherit the asset / category thresholds and set the delay time before an
alert is triggered.
Best Practice Note: It is recommended to inherit the configuration from the
Asset / Category. Only set local conditions when required.
Event Conditions
Configure the Event Conditions according to the following:
To Next Page
Loading...
