Stanley T15h - UD (Unidirectional) Deployment Configuration

T15h Tag Deployment & User Guide
27
UD (Unidirectional) Deployment Configuration
Configure the following in the DM app:
1. Turn Wireless Association Off (enabled by default).
2. Set the Data Frame Format (default is CCX).
3. Select a Configuration ID and then tap Apply .
These are pre-defined configurations. One ID must be selected. You can
view more details about each ID by tapping on the information icon .
ID
Description
ID 191
1min Beacon transmission and logging
interval to 1min).
ID 192
5 ission and logging
interval to 5min).
ID 193
15
interval to 15min).
4. Set the Wi-Fi Channels accordingly (default is 1, 6, 11) and then tap Apply
.
5. Tap Sensor Settings (this option is only available if Wireless Association
is turned Off).
6. Configure the Sensor Settings: