T15h Tag Deployment & User Guide
47
the humidity humidity reaches 58
(2 below the max threshold of 60).
ļ Trigger alert after:
a configured range before an Alert is sent. For example; if the time
an alert will be triggered if its value does not normalize within the set time
of 15 min.
Setting Thresholds on an Asset Level:
If configuring temperature and humidity thresholds on individual assets, select
Set custom temperature thresholds for this asset (for temperature) and Set
custom humidity thresholds for this asset (for humidity), and enter the
appropriate values. See above for descriptions.
Configuring Events
Events are configured in MobileView to trigger alerts according to specified
parameters.
The following Events should be used for the T15h Tag:
Triggers alerts when the temperature
values are out of a configured range.
Triggers alerts when the humidity values
are out of a configured range.
triggers alerts accordingly.
Additionally, an alert can be triggered if the
tag has no batteries or they are removed.
Triggers alerts if the tag fails to report for a
specified time.
External Power (Optional)
supply is disconnected for a period of time.
Triggers alerts when a sensor error occurs
which prevents data from being received.
Temperature Event
This event issues an alert based on temperature readings transmitted by
active tags equipped with a temperature sensor. You can set specific
conditions for the alert or inherit the asset / category thresholds and set the
delay time before an alert is triggered.
To Next Page
Loading...
Need help?
General
