T15h Tag Deployment & User Guide
46
Select Set custom temperature thresholds for this category, and enter the
thresholds for all assets that will be placed in this category. Assets in this
category can either inherit these thresholds, or be configured individually
see Setting Thresholds on an Asset Level below.
Set the Minimum and/or Maximum temperature thresholds. Both or one
temperature threshold can be entered. If a single threshold is entered, for
example just the Maximum Temperature, the tag will only monitor and
alert when the Maximum Temperature value is reached.
Set temperature status to
thresholds. For exam
temperature reaches 13 (2 below the max threshold of 15).
Trigger alert after: e out of
a configured range before an Alert is sent. For example; if the time
an alert will be triggered if its value does not normalize within the set time
of 15 min.
Humidity Thresholds
Select Set custom humidity thresholds for this category, and enter the
thresholds for all assets that will be placed in this category. Assets in this
category can either inherit these thresholds, or be configured individually
see Setting Thresholds on an Asset Level below.
Set the Minimum and/or Maximum humidity thresholds. Both or one
humidity threshold can be entered. If a single threshold is entered, for
example just the Maximum Humidity, the tag will only monitor and alert
when the Maximum Humidity value is reached.
Set humidity status to
For example: If the min threshold is 40
To Next Page
Loading...
Need help?
General
