Stanton SC System 3 - Important Safety Instructions

Important Safety Instrucons
• Read and follow the provided instrucons before operang the SC System 3.
• Adhere to all warnings and security advices, and retain this document for future reference.
Installaon: Install the SC System 3 in accordance with the provided instrucons
Power Supply:
• The SCS.3m should be connected to a power supply outlet only of the voltage and frequency marked on its rear
panel and/or its AC adapter.
• The power supply cord should be routed so that it is not likely to be walked on or pinched.
• The power supply cord of the SCS.3m should be unplugged from the wall outlet when it is to be unused for a
long period of me, or during electrical storms.
Placement and Environment:
• Locate the SCS.3 controllers away from direct sunlight and any equipment that produces heat such as power
supplies, amplifiers, and heaters.
• Place your SCS.3 controllers on stable surfaces, away from sources that generate hum or noise, such as
transformers, or electric motors.
• The locaon and posion of the SCS.3 controllers should not interfere with their proper venlaon.
• Do not use the SCS.3 controllers near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub,
in a wet basement, or near a swimming pool.
• To reduce the risk of fire or electric shock do not expose the equipment to rain or moisture or use it in damp or
wet condions.
• Protect the SCS.3 controllers from excessive dirt and dust.
• Avoid drinks spillage, tobacco ash, and other contaminants that may affect the performance of the touch surface.
• Do not place heavy objects on the SCS.3 controllers surface.
Cleaning: Unplug the SCS.3m from the wall outlet before cleaning. Never use benzine, thinner, or other solvents
for cleaning. Use only a so damp cloth.
Service:
• The SCS.3m contains no user-serviceable parts.
• The manufacturer is not responsible for any damage or personal injury resulng from unauthorized user
servicing or modificaons. Please read the warranty.
• The warranty will be void if any unauthorized service by the user is detected.
• If service is required, please contact Stanton Tech at +1 954.316.1500 (Opon 3)
ii
WARNING
CAUTION: To reduce the risk of electric shock, do not remove any cover.
No user serviceable parts inside. Refer servicing to qualified personnel only.
The lighng flash with arrowhead symbol within the equilateral triangle is intended to alert the user to
the presence of un-insulated “dangerous voltage” within the product enclosure that may be significant
enough to constute a risk of electric shock.
The exclamaon point within the equilateral triangle is intended to alert the user to the presence of
important operaon and maintenance (servicing) instrucons in the literature accompanying this
appliance.
To reduce the risk of electric shock, do not expose this apparatus to rain or moisture. Ensure that the apparatus
is not exposed to splashing and that no objects filled with liquids, such as vases, are placed on the apparatus.
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION
To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet
unless the blades can be fully inserted to prevent blade exposure.
CAUTION