Stanton SC System 3 - Selecting Presets; SC System Configuration; MIDI Learn

Selecng Presets
6.2.1 Selecng Presets
To use the generic preset for MIDI mapping with the SCS.3d, you need to select the proper preset in
DaRouter. Depending on how you intend to use the SCS.3d with your applicaon, you will need to
select one of the following presets.
35
Preset Name Funconality
GENERIC Single SCS.3d
This preset is used when only one SCS.3d is required for
performance. Only one deck is enabled so this preset will
not switch between deck A/B. This preset would be used
for non-standard deck mapping such as for video
applicaons.
The DECK buon provides another “vinyl” mode layout
instead of doing deck switching. In this preset, MIDI
messages are sent on channel 8 only.
GENERIC Single SCS.3d Dual Vir-
tual
This preset is used when using one SCS.3d is being used
to control 2 virtual decks. This preset would be used for
most DJ applicaons.
When using this preset, pressing the DECK buon will
switch between decks A and B. When switching decks the
notes and control messages are the same, only the MIDI
channel changes from 8 for deck A and 9 for deck B.
GENERIC Dual SCS.3d
This preset is used when two SCS.3d’s are connected, and
each unit needs to be directly mapped to deck A and B
respecvely. Because both decks are directly mapped,
there is no need for deck switching, so the DECK buon is
disabled. In this preset MIDI messages are sent on channel
8 for deck A and channel 9 for deck B.
6.3 SC System 3 Configuraon
To use all 3 controllers together as a system for generic MIDI mapping, you will need to run DaRouter
and select the “GEN SC System 3” preset. This will place the SCS.3d’s into the GEN Dual SCS.3d preset
and the mixer into Automac mode as described above.
6.4 MIDI Learn
Now that you have configured the SCS.3m, SCS.3d, or the enre SC System 3 for Generic MIDI Control,
you can use MIDI Learn to assign any of the controls into your soware applicaon. Almost all audio
applicaons support MIDI Learn, but each applicaon implements MIDI Learn in a different way.
To obtain more informaon about how MIDI Learn works in your favorite applicaon, please read its
User Manual.