Stanton SC System 3 - Specifications

Specificaons
8. Specificaons
SCS.3m Control Specificaons (physical):
17 Buons
11 Sliders
2 Level Meters
SCS.3m Control Specificaons (banked in firmware):
39 Sliders
36 Buons
6 Level Meters
SCS.3d Control Specificaons (physical):
8 Buons
2 Sliders
3 Sliders (StanTouch area)
5 Buon (StanTouch area)
1 Circular Control w/ 1 slider (StanTouch area)
SCS.3d Control Specificaons (dual generic preset):
18 Sliders
64 Buons
2 Circular Controls
MIDI Specificaons:
Standard note messages for each control
Relave control change movement message for each slider
Absolute posion control change messages for each slider
Mulple feedback modes for LED chains (single LED, sweep, boost/cut, spread)
Mulcolor (blue, red, purple) control
USB Specificaons:
USB 1.1 and 2.0 class compliant MIDI controller
USB bus-powered*
SCS.3m Power Specificaons
12 VDC/1500mA
Minimum System Requirements:
Mac:
Power PC G5 or mulcore Intel® processor
Mac OS X (v10.4 or later), Intel Core Duo 1.66 GHz, 1 GB RAM
Windows:
Windows XP (SP2, 32 Bit) or Vista (SP1, 32 Bit, 64 Bit)
Penum IV or Athlon 1.4 GHz (SSE1), 1 GB RAM
Internet connecon for Virtual DJ LE acvaon
Form Factor:
Dimensions for each SCS.3 component (H x W x D): 8.52 in. x 4.72 in. x 1.38 in.
216.5 mm x 120 mm x 35.25 mm
Dimensions for the enre SC System 3: 8.52 in. x 14.16 in. x 1.38 in. / 216.5 mm x 360 mm x 35.25 mm
Weight:
SCS.3d – 1.10 lbs / 0.499 kg
SCS.3m – 1.16 lbs / 0.526 kg
*USB hub/port must meet USB power specificaons, when internal USB hub is used addional power must be
supplied to unit.
37