Software Manual
120
(3) The following confirmation dialog box appears to check with you if you want to delete the
currently registered control object.
To continue, click “Yes”.
Notes: Once a control object is deleted, it cannot be recovered.
(4) The following dialog box appears. Enter the name of the cash drawer to be added.
Click “OK”.
(5) When the cash drawer is added and the control object is changed to "OPOS CCO (OPOS common
control object)", "OPOS CCO" is selected in the ‘Control Object Registration’ field.
Click “Apply Changes” to register the new cash drawer.
Notes:
If a Star cash drawer is used with a non-Star control object, it may not run normally.
If this occurs, register "OPOS CCO (OPOS common control object)" we recommend.
To Next Page
Loading...
