Software Manual
95
4.3.2. Default Print Settings
■ Line Spacing
The default line spacing is "4 mm".
If the spacing is set to 4 mm (the initial setting), the printer will add a 1-mm line space between each 3-mm-
tall line of characters. If the spacing is set to 3 mm, the added spacing is omitted and receipts are
correspondingly shorter. But note that the shorter receipts may be harder to read.
■ Print Density
Adjusting the print density allows for adjustment in the level of contrast to compensate for the different
levels of sensitivity of different types and grades of thermal paper. The recommended setting is 100%
(Default).
■ Print Speed
Depending on the application, it may be desirable to slow down the speed of printing. This is typically done
to adjust the quality of print based on the grade and type of paper used. The recommended settings for most
cases “High” (Default).
To Next Page
Loading...
