Software Manual
99
4.4.1. Device Registration
Register the device (futurePRNT series printer queue) using your registered Star Micronics Cloud Services
account.
Once you have registered the device, you can use the service of uploading print data to the cloud server and
manage the registered device from the Star Micronics Cloud Services dashboard.
(1) Enter the username and the password of your registered Star Micronics Cloud Services account and
click “Register Device”.
(2) The following dialog appears. Click OK.
(3) When the device is registered successfully, the account information of the connected Star Micronics
Cloud Services appears.
You can change the device name by connecting the dashboard with the registered account from
“Connect to Dashboard Website”. When the device name is changed, click to update the device
information on the screen.
Note: To change the account used for the device registration, please uninstall the driver utility and re-
install it.
To Next Page
Loading...
