Star Micronics TSP100IIIU - TCP;IP Port Emulator Service Setting; Deleting a Virtual TCP;IP Port; Health Check

Software Manual
162
4.17.2. TCP/IP Port Emulator Service Setting
Select the Startup Type for the emulator service.
To enable use of the emulator service, set the Startup Type to either Manual or Automatic.
If you select Automatic, the port emulator service will start automatically when the system starts up. If
you select Manual, the service will not start until you click the [Start] button.
Notes:
Before stopping the service, make sure that you have closed all applications that are using virtual
TCP/IP ports.
If you stop the service while an application is still running, you may get an error the next time you
try to start it.
4.17.3. Deleting a Virtual TCP/IP Port
Select the port that you wish to delete, and then click Delete Port.
When the following dialog appears, click Yes.
Next, click the Apply Changes button to complete the deletion of the port.
4.17.4. Health Check
Click the [Check Health] button to check that the selected port is working correctly.