Software Manual
44
2.5. ESC/POS Mode
The TSP100 futurePRNT provides ESC/POS mode emulation, which can be configured in “TSP100
Configuration Utility”. Thus, even if your current software is designed for the ESC/POS mode, you will
be able to use it as is, without making changes.
The functions (logo printing, journal, etc.) of the TSP100 futurePRNT remain usable even when you
print in the ESC/POS mode.
For information about how to use the ESC/POS mode, refer to "4.18 Print Job Routing (Write Printer)
".
2.6. Star Virtual TCP/IP Port Emulator
< TSP100IIIW and TSP100IIILAN only>
You can use the TSP100LAN Setup Utilities to set up virtual TCP/IP ports. This will enable you to
continue using applications that directly designate their own TCP/IP sockets.
To Next Page
Loading...
