Software Manual
19
1.3.2. Creating a Printer Queue
(1) Select the printer to create a printer queue from the printer list, and then click [Printer Queue].
(2) The following dialog now appears. The dialog shows the queue name and the port name for the
printer you are setting up. You can leave the queue name as it is , or you can change it to anything
you prefer. If you wish to use this printer as your default printer, check [Default Printer]. If you
want to output a test print after completing the settings, check [Print Test Page]. After making
appropriate settings, click [Apply].
The following characters can be used in queue.
Uppercase and lowercase letters, numerals (0 to 9), hyphens, underscores, periods,
spaces, and parentheses.
To Next Page
Loading...
