Software Manual
10
1.2.
Adding a Printer (TSP100ECO/IIIU)
(1) Load roll paper in the TSP100 futurePRNT, and connect to a computer.
For information about how to load paper and connect to a computer, refer to the
Online
Manual for TSP100IIIU , and the Hardware Manual from Star’s web site for other models.
(2) Turn the printer on.
With "Plug and Play", the computer detects a new hardware product and automatically installs
the printer driver.
Then, the following window will appear in the lower right of the Windows screen.
(3) In Control Panel, select “Devices and Printers”.
If "Star TSP100" appears, installation is completed.
To Next Page
Loading...
