Star Micronics TSP100IIIU - Page 177

Software Manual
177
- Preview and On Demand
When On Demand is in use, Preview function cannot be used.
- Ethernet Setup Tool
After generating the printer queue using the Ethernet Setup Tool, the "Complete" message may appear
behind other windows.
Star recommeds to close other windows first before using the Ethernet Setup Tool.
- Using Multiple functions at the same time
The following functions cannot be used simultaneously:
- Windows Printer Driver
- OPOS
- JavaPOS
- Virtual Serial Port
-Virtual TCP/IP Port
- Write Printer API
* If it is necessary to use multiple funcitons, finish printing via one method before
beginning via another.
- Multiple usage of Virtual TCP/IP Ports
When sending print data to multiple Virtual TCP/IP ports from one PC, the print speed will be slow.
If one printer is powered OFF, the other printer will stop printing for approximately 10 seconds.
- Virtual TCP/IP Ports Service
You cannot control multiple services individually (start/stop) from one PC.
All Virtural TCP/IP Port Services will start/stop together.
- Paper size setting in some applications
In some applications (e.g. Microsoft Office), you may not be able to change the paper size from the UI in
the applications.
In this case, please set the paper size from "Printer properties" first. Then you can select the paper size
from the UI in the applications.