Software Manual
32
(3) Select [ Printers & scanners ], and click [ Add a printer or scanner ].
(4) Select the desired device name (TSP100-XXXXX), and click [ Add device ].
If the device name was changed, then select the device name that it was changed to.
(5) When the device appears in “Printers & scanners”, pairing is completed.
After a while, "Driver is unavailable" will be displayed, however pairing is completed.
The device name created here cannot be used for the destination specified when printing from a
Windows application. Proceed to perform Section 1.5.2 "Creating a Printer Queue"
.
To Next Page
Loading...
