Getting Started
This software supports the following Windows operating systems.
・Windows 11* 64-bit (except IoT Enterprise)
・Windows 10 * 32-bit and 64-bit (except IoT Enterprise)
・Windows 8.1 * 32-bit and 64-bit (except WindowsRT 8.1)
・Windows 7 32-bit and 64-bit
* Limitation for Windows 11 / 10 / 8.1
・
USB Printer will not be appeared in [Device and Printer] if its power is off.
* Limitation for Windows 10 / 8.1
・
Star original Printer Driver Function (e.g. Logo Setting) can not be changed from "Windows UI".
However, once the setting of its function is changed from "Desktop mode",these function can be
used on "Windows UI" as well.
・
Error status (e.g. Paper empty during printing) will not be shown in "Windows UI".
Precautions for Windows upgrade/update
・
Before starting the Windows upgrade or update, it is recommended to turn off your printer.
・
If you are using the TSP100ECO which does not have a power switch, please unplug the power
cable or the USB cable.
・ All company and product names are trademarks or registered trademarks of their respective owners.
(https://www.star-m.jp/eng/trademarks.html
)
Copyright 2005 - 2022 Star Micronics Co., Ltd.
To Next Page
Loading...
