Software Manual
79
(3) Click “Launch Configuration Application” in the "TSP100 Config" tab.
(4) The "User Account Control" window will appear. Click "Yes".
(5) When the LAN and Bluetooth functions are installed with the standard setup, if an avaliable printer is not
found, the following window will appear.
When using the TSP100LAN / Bluetooth series printer, click "OK" to start the LAN/Bluetooth setting
tool, and add the required printer, referring to "1.3 Adding a Printer (TSP100IIIW)" , "
1.4 Adding a
Printer (TSP100IIILAN)" or "1.5 Adding a Printer (TSP100IIIBI)".
When using a USB printer, click “Cancel” to stop the procedure, and add the required printer, referring to
"1.2 Adding a Printer (TSP100ECO/IIIU)
".
To Next Page
Loading...
