Software Manual
97
■ Resolution Pitch <ESC/POS mode only>
Star Line standard: Uses Star Line mode’s standard resolution. (Characters are smaller than on true
ESC/POS printers, so the printer receipt is smaller and the right margin is larger.)
ESC/POS compatible (default): Margins and line widths are the same as on a typical ESC/POS
printer. (Characters are the same size as with Star Line standard, but padding is added so that printer
area occupies the same area as on a true EPSON/POS printer.)
Using this function, you can use legacy software solutions with no change.
If "Star standard" is selected, the pitch value is not adjusted.
■ Block Print Start Timing <TSP100IIIBI mode only>
The default line spacing is "Detect Page End".
If you select "Detect Page End", the printer receives 1 page of data, and then starts printing. This is suited
to printing receipts that include images (logos, etc).
If "Detect Line End" is selected, because the printer receives 1 line of data and then starts printing, the
time until the printer starts printing can be reduced. This is suited to printing receipts that include text
data only. A white line may be included when printing receipts that include images (logos, etc).
To Next Page
Loading...
