StarLine A93, StarLine A63
120
Function: Variant 1 Variant 2 Variant 3 Variant 4
№16 – Choice of ignition
2 wire output upon
cranking
IGN ACC
IGN*
START
№17 – Disarm with
engine status
Continue
Shutdown
engine
Shutdown
engine
Shutdown
engine
№18 – The duration of
the Webasto working
20 min 30 min 40 min 50 min
№19 – The (1L+3)
engine starting algorithm
Webasto start
OFF
Only Webasto
starting
First - Webasto
heating,
then engine
starting
First - Webasto
heating,
then engine
starting
(Webasto still
ON)
The factory settings are highlighted in gray in the table.
Attention! Resetting to the factory default settings of an
already installed and working complex can lead to the
impossibility of remote and automatic starting of the engine!
To Next Page
