User’s manual
13
• Check the vehicle’s battery voltage.
• Separate indication of cabin temperature and under the hood
• «Comfort» function.
• Call from the car.
• Light warning about opened door.
• Turbo timer mode.
• Remote programming of functions and remote controls.
• Service mode.
• Dome light control.
• Call mode from car.
• Protection against accidental pressing remote control buttons.
• Learn new remote controls and removal of the lost remote
controls from car alarm memory.
• Display of the current time, alarm, reverse timer.
• Indication of remote control battery discharge.
• Support external GSM modules StarLine M20, M30 and StarLine
M21, M22, M31, M32 or installation of built-in GSM module
Remote engine start functions
• Remote start / expanding time of engine run / engine shut
down.
• Automatic engine start by temperature, alarm clock
periodic timer start for every 2, 4, 6, 8 ..... 24 hours.
• Support of remote engine start in cars with PST.
• Selecting the type of engine: petrol / diesel.
• Selecting the transmission type: Auto / Manual.
• Detection of engine running by TACH signals, generator or
voltage.
• Protection against starter overcranking when starting the
engine.
• Remaining engine run time on LCD display of remote control.
To Next Page
Loading...
