StarLine A93, StarLine A63
62
4
By short press of buttons 2 and 3
set desired sensitivity.
5
remotecar
• Melody plays.
• 3 light ashes
• 2 siren signals
To exit sensitivity adjustment mode
press button 3 at rst long (until
melody appear), then short:
If after entering the sensitivity adjustment mode of shock
sensor any button is not pressed on the remote control
within 15 seconds car alarm will automatically exit from
adjustment without saving changes. Followed by 4 audio
remote control beeps and 4 light ashes.
Warning! The sensitivity of the heavy level of shock sensor
can not be set higher than the sensitivity oight level.
To Next Page
