XT6600/6800
9
I
NSTALLATION
E
LECTRICAL
R
EQUIREMENT
Your SteelFlex’ treadmill is intended for use in the country to which it
was shipped. Electrical supplies outside of this country may differ
and may not be compatible with the product. Please consult
Customer Support before using the treadmill in a different country.
L
ocation
When choosing a location for the treadmill, pick a location that is
unobstructed. The treadmill must have the following clearance.
These spacing requirements are mandatory for the safe use of the
treadmill. If an accident should occur, you must have sufficient space
to move awa
from the treadmill
Non-entry side of treadmill - Minimum of 8 inches (20cm)
Entry side of treadmill - Minimum of 36" (90cm)
Front of the treadmill - Minimum of 12 inches (30cm)
Behind treadmill - Minimum of 6 feet (180cm)
To Next Page
Loading...
