35
EN
Introduction
These operating instructions explain the STEPCRAFT 3D touch probe and inform you about the correct handling of the
system. Please read these operating instructions as well as all accompanying documents in their entirety before commis-
sioning of the system in order to become familiar with the characteristics and the operation of the product. The improper
operation of the CNC gantry milling system can lead to damage to the product and property and can cause serious inju-
ries, electric shock and / or re.
It is imperative to adhere to the safety instructions listed in these operating instructions at all times. Should any doubts
or the need for further information arise, do not hesitate to contact us prior to the commissioning of the CNC system. You
can nd our contact details on the cover sheet or in chapter „10 Contact“.
You can order the separately available spare parts from our online shops:
The contents of these operating instructions are the intellectual property of the STEPCRAFT GmbH & Co. KG.
Forwarding or copying (also in excerpts) is not allowed without our explicit and written authorization. Any infringements
are prosecuted.
COPYRIGHT
Shop EU and rest of world Shop USA
https://shop.stepcraft-systems.com/ https://www.stepcraft.us/
To Next Page
Loading...