163
OMAHA STANDARD
General Information
The Omaha Standard DTH series dump trailer hoists are designed for 8-20 foot bodies. The
low mounting height, rigid construction, light weight, and easy installation make the DTH
series sump trailer hoists a standard in the industry
Single-acting electric is standard with some of the DTH series dump trailer hoist models. A
double-acting electric is available as an option. The double-acting system gives a high degree
of load control and prevents the body from free dumping when the load shifts. It will help
return a shifted load and aids in holding body down on chassis during transport
The hoist capacities very as a result of the hoist mount to rear hinge distance, body length, and
dump angle used. Capacities are shown in the tables
NOTE: Consult factory for hoist applications other than those shown in these charts
To Next Page
Loading...
