8
Loading Main Hopper
WARNING: Hydraulic equipment can crush any object with tremendous force, causing injury
or death. Keep yourself and all other persons clear when raising and lowering hopper.
Hydraulically Operated Doors
1. Shut OFF the heating system.
2. Check area for door clearance.
3. Use the switch on the control panel to open and close doors.
4. Check that no foreign material has entered the equipment.
5. Check that the proper material is being used.
6. Fill the hopper box with the desired amount of material.
7. Close doors.
Loading Tack Tank
WARNING: DO NOT overheat bituminous or emulsion materials, strictly observe the recom-
mendations of the material manufacturer for melting and pouring temperatures.
CAUTION: Never load a tank with heated material when moisture is present in the tank. Thor-
oughly clean tank and pumping equipment when changing materials that are not compatible.
1. Burners must be OFF when loading tack tank
2. Verify that the proper material is being loaded.
3. Fill the tack tank with the desired amount of material.
4. When transporting the unit, shut off the burner.
OPERATIONS Loading
To Next Page
Loading...
