Steris InnoWave Unity - Page 40

4. On the display, touch Prime Chem. Pump at the bottom of screen. The button
changes color to indicate that the chemical pump is now active and pumping
chemical from the chemical bottle. The chemical pump will operate and then turn
off automatically.
5. Repeatedly operate the chemical pump until chemical can be seen entering the
tank from the chemical delivery port. The chemical pump is now primed.
6. The chemical pump can be turned off at any time by touching
PrimeChem.Pump on the display while the chemical pump is operating.
30 PREPARING CHEMICALS
InnoWave Unity & Unity 20 Operator Manual