10. Touch OK on
Cycle Complete - Unload
screen to confirm unloading of instruments.
The display returns to
Load Instruments
screen.
11. The sonic irrigator is now ready for instrument loading and a new wash cycle.
6.6 Pausing or Aborting a Wash Cycle
During operation it is possible to pause or abort wash cycle if required.
1. During the wash cycle, touch the pause symbol located at the top-left of the
display. The wash cycle is immediately paused and the
CyclePaused
appears on
the display.
2. To resume the wash cycle when ready, touch Resume on the display.
3. To abort the wash cycle, touch Abort on the display. The
Program Aborted
screen
appears as confirmation that the wash cycle has aborted.
58 PERFORMING A WASH CYCLE
InnoWave Unity & Unity 20 Operator Manual
To Next Page
Loading...
