5. Wait for logs to be copied to the USB flash drive. The display will report the number
of files being copied and show a progress bar.
6. When the download to the USB flash drive is complete, the display will show that
the copy is complete and that it is safe to remove the USB flash drive from the
equipment.
7. Touch OK on the display to return to the main menu.
8. Remove the USB flash drive from the data port.
9. On the USB flash drive, the wash cycle logs are saved in the following location:
STERIS\<machine serial number>\<cycle range>\<cycle number>.txt
DOWNLOADING WASH CYCLE LOGS 87
InnoWave Unity & Unity 20 Operator Manual
To Next Page
Loading...
