Please note: the data formatting only applies to the uploading of data into the system,
it is not taken into account for the encoding of identifiers.
1st case: UHF data formatting before uploading to the system without active Bluetooth
®
configuration:
There are 4 UHF ID formatting modes:
Example: EPC data: AA BB CC DD EE xx xx ... VV WW XX YY ZZ with ‘Size of the credential
sent to the system’ fixed to 4bytes.
• : ID feedback = WW XX YY ZZ
• : ID feedback = ZZ YY XX WW
• : ID feedback = AA BB CC DD
• : ID feedback = DD CC BB AA
To Next Page
Loading...