Stid ultrys - Page 95

95
SPECTRE NANO READ ONLY
© STid – MU_ULTRYS_V3.0.1_EN
Anti-intrusion settings
Error code sending
Sending error code 0xAA every 2 seconds as long as the reader is
"open".
Buzzer Activation
Activation of the buzzer at the highest intensity as long as the
reader is "open".
The buzzer stops as soon as the cover is detected as being closed or
when communication via the internal USB is established (for
configuration for example) or if the reader is reconfigured by BLE or
if the reader is restarted.
Deleting keys
Key erasure upon detection of opening.
Activation of the LED
to signal the key
deletion
* Can only be activated
if the Erase keys option
has been activated
Activation of the fixed or flashing LED depending on the setting
below:
The LED sequence is repeated as long as the reader is switched on
and stops if communication via the internal USB is established (for
configuration for example) or if the reader is reconfigured using the
BLE or if the system is restarted.
3