OPERATION
Operation
10 | WPF basic www.stiebel-eltron.com
4.5.4 Time and date
You can adjust the time and summertime with the TIME/DATE
menu item.
At the factory, summertime is set to begin on 25 March and to
end on 25 October.
TIME/DATE
SET CLOCK
TIME
TIME
YEAR
MONTH
DAY
SET CLOCK
BACK
TIME/DATE
4.5.5 Holiday and party program
In HOLIDAY MODE, the heat pump system runs in setback mode
and frost protection for DHW heating is enabled. Holiday mode
is displayed when the flap is closed. For the start of the holidays,
the year, month and day are entered; also enter the year, month
and day for the end of the holidays. The start time is 0:00 h on the
first day of the holidays. The end time is 24:00 h on the day the
holiday ends. After the holiday period has expired, the heat pump
system operates again in accordance with the previous heating
and DHW program.
In PARTY MODE, you can extend the day mode for central heating
by a few hours. This is displayed with the flap closed.
HOLIDAY/PARTY
HOLIDAY
YEAR START
MONTH START
DAY START
YEAR END
To Next Page
Loading...
Need help?
General
