115 B58FZS 0000000078 EN 002
DECLARATION OF CONFORMITY
12 Declaration of Conformity
(in accordance with EC Directive 2006/42/EC, Appendix II 1.A)
Wilhelm STOLL Maschinenfabrik GmbH
Bahnhofstrasse 21
38268 Lengede, Germany
hereby declares that the machine in its state on delivery complies with the directives and harmonised
standards listed in the following, and will be made available on the market:
The machine complies with all relevant and applicable provisions of the
Council Directive 2006/42/EC on machinery,
Directive 2014/30/EU of the European Parliament and the Council for Electromagnetic Compatibility
(EMC),
Directive 2014/68/EU on the provision of pressure equipment on the market.
The technical documentation was produced according to Annexe VII A of Directive 2006/42/EC, and is
the responsibility of the development manager at Wilhelm STOLL Maschinenfabrik GmbH,
Bahnhofstrasse 21, D-38268 Lengede.
Designation: Front loader
Type: Profiline
Machine no.: 7015000 to 7999999
With the intended use/
function:
As a mounted implement, the front loader is "interchangeable equipment" as
defined by the Machinery Directive 2006/42/EC. The front loader is mounted
on agricultural and forestry tractors using a mounting frame, and serves to
mount other interchangeable equipment (implements), which are used for
processes and tasks in the agricultural and forestry sector. Further
information on the intended use with the operating conditions, the
description, the function and other technical data for the front loader can be
found in the operating instructions.
To Next Page
Loading...
