Stoll FZ - Picking up and Putting down the Implement

B58FZS 0000000078 EN 002 82
OPERATION
6.5 Picking up and putting down the implement
⚠ WARNING
Risk of injury and material damage caused by falling loads or lowering front loader!
With dumping implements that are long or protrude far to the front, the centre of gravity can shift and
cause the pressure relief valve of the front loader to open by itself. As a result, the front loader dumps
or lowers uncontrollably and can lead to serious injuries and damage.
 Observe the maximum load of the front loader (see 11 Technical specifications).
 Always use sufficient counterweights at the rear of the tractor (see 5.3.2 Ballasting).
 During loading work, instruct persons to exit the working area (see 2.8 Danger zones).
NOTICE
Material damage due to unsuitable implements!
The mounting of implements that are too long, too wide or too heavy can cause damage to the tractor,
the front loader or the implement.
 Ensure that the dimensions and weights of the front loader and implements fit to each other.
 Only use implements that are designed for the front loader and the mounted change frame.
 Only use implements that are appropriate for the kind of work you are doing.
 Observe the operating instructions of the implement.