47 B58FZS 0000000078 EN 002
FUNCTIONS
4.7 Return-To-Level (FZ-L)
⚠ WARNING
Possible risk of injury due to uncontrolled lowering!
Actuation of the RTL button while dumping causes the front loader to be lowered. Moreover, when
dumping with insufficient fluid supply, a vacuum can form in the implement cylinder, which also causes
lowering of the front loader. This can cause injury to persons standing in the surrounding area.
Only press the RTL button when lowering the front loader.
Throttle the oil flow as little as possible.
If necessary, increase the idling speed.
The return-to-level sensor is located on the
indicator on the left implement cylinder. It enables
automatic lowering of the front loader to its pre-
set position by pressing a button. This mainly
facilitates loading work that involve repetitive
movement.
To do so, an additional valve on the implement
cylinder diverts the hydraulic fluid flowing out
while lowering. The sensor monitors the position
of the implement and emits the signal for closing
the valve as soon as the implement has reached
its pre-set position.
Fig. 31 Return-to-level function
B06F
To Next Page
Loading...
