Stoll FZ - Page 63

B58FZS 0000000078 EN 002 62
START-UP
(3) Switch off the tractor.
 Apply the parking brake.
 Stop the engine.
 Depressurize the hydraulic system. To do
so, move all of the operating levers to the
end position.
(4) Connect the hydraulic lines of the front
loader (see 6.3 Operating the hydraulic
couplings).
(5) Connect the electric cables.
(6) Start the tractor.
(7) Lock the front loader pins in the front loader
mountings.
 Use the lifting function until the front
loader pins are locked in the mountings.
(8) Close the front loader locking mechanism.
 Use the lifting function until the front
loader is just above the ground.
 Apply the parking brake.
 Stop the engine.
 Shift both locking levers downwards.
(9) Fold in the parking supports.
 Fold in both parking supports (see
6.2 Operating the parking supports).
 The front loader is mounted and ready for
operation.
Fig. 52 Switching off the tractor and connecting the
hydraulic lines
B07F
Fig. 53 Locking the pins in the front loader mountings
B07G
Fig. 54 Folding in the parking supports and closing the
front loader locking mechanism
B07H