STONEX S10 User Manual

Stonex S10 GNSS Receiver – User Manual 5
4: GSM/WCDMA Network led (green):
The led is on when the network module is selected
as RTK data link. It starts to blink when receiving and
transforming data. (download in rover mode and
upload in base mode).
5: BLUETOOTH led (blue):
Once S10 is connected with the controller this led
will switch on.
6: SATELLITE led (green):
The led blinks and shows the amount of locked
satellites. It starts to blink every 30 seconds for a
number of times equal to the number of locked
satellites.
Fig 2.7 - S10 Bluetooth led
Fig. 2.6 - S10 Network led
Fig. 2.8 - S10 satellite led

STONEX S10 Specifications

General

Brand	STONEX
Model	S10
Category	Receiver
Language	English