How to replace empty support spool in Stratasys F370 3D Printers?
If your Stratasys 3D printer indicates to replace the empty support spool, remove the empty material spool and replace it with a new spool.
What to do if task already running on Stratasys F370 3D Printers?
If a task is already running on your Stratasys 3D printer, wait until the load/unload in process is complete before attempting to load material to or unload material from another material bay.
What to do if support material does not match selected job in Stratasys F370?
If the support material does not match the selected job on your Stratasys 3D printer, unload the incorrect support material and load the correct support material for the selected job.
What to do if Stratasys F370 3D Printers is not initialized?
If your Stratasys 3D printer is not initialized, wait at least 60 seconds after the error is first displayed.
What to do if cannot load support in to model head in Stratasys F370 3D Printers?
If your Stratasys 3D printer indicates that you cannot load support in to model head, remove the support spool from its current location within the material bay and insert it into a support material bay.
What to do if model filament broken in Stratasys F370?
If the model filament is broken in your Stratasys 3D printer, remove the material spool and clear all filament from the filament tubes.
What to do if Stratasys F370 3D Printers shows file not found?
If your Stratasys 3D printer displays 'File not found', ensure that the USB flash drive containing the selected job file is securely inserted into one of the USB ports.
What to do if insufficient model material for part build in Stratasys F370?
If there is insufficient model material for a part build on your Stratasys 3D printer, install additional model material into the printer.
When to replace support head in Stratasys F370?
If the support head on your Stratasys 3D printer has reached its odometer limit of 1500 build hours, it is recommended that you change the head prior to starting a new build.
When to replace model head in Stratasys F370?
If the model head on your Stratasys 3D printer has reached its odometer limit of 1500 build hours, it is recommended that you change the head prior to starting a new build.
Basic safety tips for printer installation, operation, and maintenance.
Steps for stabilizing, identifying, and connecting the printer.
Covers loading files, viewing job info, build status, and queue operations.
Details on managing materials and heads, including status, details, and maintenance.
Accessing and configuring printer settings, calibration, maintenance, network, power, and light.
Procedures for powering the printer ON and OFF.
Steps for loading, unloading, and storing material spools.
Instructions for replacing standard and PLA model print heads.
Steps from preparing the printer to completing a build and managing defaults.
Procedures for automatic and manual tip calibration.
Explains warnings and errors encountered during operation.
General| Technology | Fused Deposition Modeling (FDM) |
|---|---|
| Build Volume | 355 x 254 x 355 mm (14 x 10 x 14 in) |
| Connectivity | Ethernet, USB |
| Software | GrabCAD Print |
| System Weight | 227 kg (500 lbs) |
| Layer Thickness | 0.127 - 0.330 mm (0.005 - 0.013 in) |
| Material Compatibility | ABS, ASA, PC-ABS |
To Next Page
